General Specifications
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | Specification | ||
|---|---|---|---|
| V6 S/C 3.0L Petrol | GTDi 2.0L Petrol | INGENIUM I4 2.0L Diesel | |
| Footbrake type: | Hydraulic, servo assisted, self-adjusting with front/rear split hydraulic system, single piston sliding calipers to the front and single piston sliding calipers to the rear | ||
| Brake control | Bosch ESP9 brake modulator | ||
| Front disc type | Ventillated | Ventillated | Ventillated |
| Front disc diameter | 350 mm (13.77 in) | 325 mm (12.79 in) | 316 mm (12.44 in) |
| Front disc thickness: | 32 mm (1.25 in) | 30.0 mm (1.18 in) | 28 mm (1.10 in) |
| Service limit | Marked on the disc | Marked on the disc | Marked on the disc |
| Rear disc type | Ventillated | Ventillated | Solid |
| Rear disc diameter | 325 mm (12.79 in) | 325 mm (12.79 in) | 300 mm (11.81 in) |
| Rear disc thickness: | 20 mm (0.78 in) | 20 mm (0.78 in) | 10 mm (0.39 in) |
| Service limit | Marked on the disc | Marked on the disc | Marked on the disc |
| Maximum disc run out: | |||
| Front - with wheel fitted | 0.075 mm (0.003 in) | 0.075 mm (0.003 in) | 0.075 mm (0.003 in) |
| Rear - with wheel fitted | 0.070 mm (0.003 in) | 0.070 mm (0.003 in) | 0.070 mm (0.003 i |
| Brake pad wear nominal thickness | |||
| Front brake pad | 12.5 mm (0.49 in) | 13 mm (0.51 in) | 13 mm (0.51 in) |
| Rear brake pad | 11 mm (0.43 in) | 11 mm (0.43 in) | 11 mm (0.43 in) |
| Minimum pad wear thickness - front and rear | 3 mm (0.11 in) | 3 mm (0.11 in) | 3 mm (0.11 in) |
| Pad material | Asbestos free | Asbestos free | Asbestos free |
| Front caliper piston diameter | 60 mm (2.36 in) | 60 mm (2.36 in) | 60 mm (2.36 in) |
| Rear caliper piston diameter | 40 mm (1.57 in) | 40 mm (1.57 in) | 38 mm (1.49 in) |
| Park brake system | |||
| Electric park brake | Motor on caliper (rear) | Motor on caliper (rear) | Motor on caliper (rear) |