LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE (X760)) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Mass Air Flow Sensor (G1818356) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
    • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
    • This procedure contains illustrations showing certain components removed to provide extra clarity.
    • This procedure contains illustrations for the left side components, right side components are similar.
  1. Remove the engine cover.

    Refer to: Engine Cover - V6 S/C 3.0L Petrol .

  2. G11308232

    Remove the left air intake pipe.

  3. G11308505

    Disconnect the Mass Air Flow (MAF) electrical connector.

  4. G11308506

    Remove the MAF sensor.

  5. G11291504

    Remove and discard the O-ring seal.

scientia non olet · About LEMON Manuals