LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE (X760)) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Mass Air Flow Sensor (G1818356) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new O-ring seal.

    Renew Part: Mass air flow sensor O-ring seal. 

  2. Install the Mass Air Flow (MAF) sensor.

    Torque Specification: 1.9 Nm 

  3. Connect the MAF electrical connector.
  4. Secure the left air intake pipe.

    Torque Specification: 3.3 Nm 

  5. Install the engine cover.

    Refer to: Engine Cover - V6 S/C 3.0L Petrol .

scientia non olet · About LEMON Manuals