LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE (X760)) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Diagnosis And Testing >> Drive Cycle >> Post Catalyst Sensors

Post Catalyst Sensors

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Post catalyst sensor monitoring can take over 30 minutes of driving to become active if the 'dew point' has not been achieved in previous drive cycles or an EMS ECU battery reset has occurred. The Drive cycle should consist of a constant speed and load allowing sufficient heat to build up in the exhaust system.