LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XF/(X260)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel (G1817213) >> Diagnosis And Testing >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel (G2167124) >> Drive Cycle: Misfire Monitors >> Test Procedure

Test Procedure

WARNING: This page is about a different car, the 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Jaguar Land Rover approved diagnostic equipment, perform routine - OBD II Readiness Tests.
  2. Start the engine and run at idle speed for a minimum of 10 minutes.
  3. Using the Jaguar Land Rover approved diagnostic equipment, check the readiness status of the misfire monitor.