LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Engine - INGENIUM I4 2.0L Diesel -- XF/(X260) ( 2 Of 3)) >> Engine - INGENIUM I4 2.0L Diesel (G1817138) >> Removal And Installation >> Oil Pump Chain (G1867695) >> Installation

Oil Pump Chain (G1867695): Installation

WARNING: This page is about a different car, the 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure a new oil pump sprocket bolt is installed.
    • Install the oil pump chain and the gear assembly.
    • Make sure that the oil pump sprocket is aligned with the oil pump shaft correctly.
    • Using the special tool to hold the oil pump sprocket, install and tighten the bolt.

      Special Tool(s): 205-053 

      Renew Part: Oil pump gear bolt  Quantity: 1  .

      Torque 

      Stage 1: 60 Nm 

      Stage 2: 90° 

  2. Install the oil pan.

    OIL PAN

  3. Lower the vehicle.
  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT