Crankshaft Front Seal (G1817145): Removal
WARNING: This page is about a different car, the 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
- Disconnect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Remove the crankshaft pulley.
Refer to: CRANKSHAFT PULLEY
Using the special tool remove and discard the front crankshaft seal.
Special Tool(s): JLR-303-1628