DTC U2013-08: Switch Pack - Bus signal/message failures: Action
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the steering wheel switchpack power and ground circuits for open circuit, high resistance
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the LIN bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs and retest. If the fault persists, install a new steering wheel switchpack