LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Glow Plug System - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Glow Plug System - INGENIUM I4 2.0L Diesel >> Glow Plugs (G1817201) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure not to interchange the glow plugs between cylinders during service of the engine. If one or more glow plugs have to be removed from the engine, make sure that they're clearly labelled with the cylinder number, so that they are not mixed up during installation into the engine.

    To install, reverse the removal procedure.

  2. If new components have been installed, configure using Jaguar approved diagnostic equipment.
scientia non olet · About LEMON Manuals