DTC U2300-55: Central Configuration - Not configured: Action

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Using the Jaguar Land Rover Approved Diagnostic Equipment, re-configure the JaguarDrive Switchpack with the latest level software
Using the Jaguar Land Rover Approved Diagnostic Equipment, re-configure the body control module with the latest level software
Using the Jaguar Land Rover Approved Diagnostic Equipment, perform a CAN network integrity test. Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the high speed CAN bus (chassis) circuit for short circuit to ground, short circuit to power, open circuit, high resistance
Install a new JaguarDrive Switchpack as necessary