LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Rear Suspension -- XE (X760)) >> Rear Suspension >> Wheel Knuckle >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11305624

    Torque Specifications: 9 Nm 

  2. G11305623

    Torque Specifications: 9 Nm 

  3. G11305622

    Torque Specifications: 35 Nm 

  4. WARNING: The component(s) may be heavy. Take extra care when handling.
    CAUTION: Make sure that a new bolt is installed.
    G11305621

    Renew Part: Lower control arm bolt(s) Quantity: 1

    Torque Specifications: 

    Stage 1: 110 Nm 

    Stage 2: 60° 

  5. CAUTION: Make sure that a new nut and bolt is installed.
    G11305619

    Renew Part: Rear upper arm to wheel knuckle nut and bolt Quantity: 1

    Torque Specifications: 

    Stage 1: 60 Nm 

    Stage 2: 60° 

  6. Use the original nut to install the halfshaft into the hub.
    CAUTION: Do not use air tools to install the halfshaft nut.
    G11305630

    Torque Specifications: 100 Nm 

  7. CAUTION: Make sure that new nuts and bolts are installed
    G11305618

    Renew Part: Rear lower control arm nut and bolt Quantity: 1

    Torque Specifications: 

    Stage 1: 48 Nm 

    Stage 2: 60° 

  8. CAUTION:
    • Discard the nuts and bolt.
    • Make sure that a new nut and bolt is installed.
    G11305617

    Renew Part: Rear lower arm to subframe nut and bolt Quantity: 1

    Torque Specifications: 

    Stage 1: 60 Nm 

    Stage 2: 60° 

  9. WARNING: Using a suitable stand, support the lower arm.
    CAUTION: Make sure that a new nut and bolt is installed.
    G11305616

    Renew Part: Shock absorber to wheel knuckle mounting nut and bolt Quantity: 1

    Torque Specifications: 

    Stage 1: 70 Nm 

    Stage 2: 120° 

  10. CAUTION: Make sure that new bolts are installed.
    G11305615

    Renew Part: Brake caliper carrier bolt(s) Quantity: 1

    Torque Specifications: 

    Stage 1: 70 Nm 

    Stage 2: 120° 

  11. G11305614

    Torque Specifications: 9 Nm 

  12. CAUTION:
    • Do not use air tools to remove the halfshaft nut.
    • Discard the nut.
    G11305613
  13. CAUTION:
    • Do not use air tools to install the halfshaft nut.
    • Make sure that a new nut is installed.
    G11305613

    Renew Part: Rear halfshaft nut Quantity: 1

    Torque Specifications: 

    Stage 1: 80 Nm 

    Stage 2: 60° 

  14. Install the wheel and tire.

    Refer to: Wheel and Tire .

  15. Lower the vehicle.

    Refer to: Lifting .

  16. Activate the electronic park brake.

    Refer to: Electronic Parking Brake Service Mode Activation and Deactivation .