Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Some variation in the illustrations may occur, but the essential information is always correct.
Some components shown removed for clarity.
Removal steps in this procedure may contain installation details.

Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Refer to: Wheel and Tire .
CAUTION:
- Use a wrench on the hexagon provided to prevent the ball joint rotating.
- Discard the nuts.
Renew Part: Stabilizer bar link nuts Quantity: 1

Torque Specifications: 60 Nm