LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Speed Control - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Speed Control - INGENIUM I4 2.0L Petrol >> Speed Control Switch >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the speed control switch.
    • Install the retaining screw.
    • Connect the electrical connector.
  2. NOTE: Make sure that the harness is routed to the position noted on removal.
    • Connect the electrical connector.
    • Install the paddle shifter.
    • Install the retaining screw.
  3. Install the driver airbag.

    Refer to: Driver Airbag Module .

  4. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals