LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Speed Control - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Speed Control - INGENIUM I4 2.0L Petrol >> Description And Operation >> Operation >> Suspend Speed Control

Suspend Speed Control

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: In the event that a memory speed has been lost during a driving cycle, confirm with the user if the "Cruise Not Available" message was observed. Loss of memory speed implies a fault has occurred. The message 'Cruise Not Available' may only be displayed on demand for some errors, so speed control needs to be requested via the SET '+' switch to drive the message.

Suspending speed control means speed control has been deactivated without loss of the memory speed. In all suspend events, the memory speed is retained. Speed control can be suspended in a number of ways, as described previously in this section.

A single operation of the 'RESUME' switch will resume speed control at the previously set speed.

scientia non olet · About LEMON Manuals