LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (MULTIFUNCTION Electronic Modules -- XE (X760)) >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Remote Keyless Entry Module >> Inspection And Verification >> Visual Inspection

Visual Inspection

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern
  2. Visually inspect for obvious signs of damage and system integrity
    ELECTRICAL
    • Fuses
    • Wiring harnesses and connectors
    • Passenger door module
    • Switches
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
  4. If the cause is not visually evident, verify the symptom and refer to the Symptom Chart, alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index
  5. Check DDW for open campaigns. Refer to the corresponding bulletins and SSMs which may be valid for the specific customer complaint and carry out the recommendations as required
scientia non olet · About LEMON Manuals