LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Piston Cooling Oil Jet Solenoid >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

    • Install the Piston Cooling Jet (PCJ) Solenoid.
    • Inspect the O-ring. Replace if damaged.
    • Torque Specification: 11 Nm 
  2. Connect the electrical connector.

Cold climate vehicles 

  1. Install the block heater.

    Refer to: Block Heater .

All vehicles 

  1. Install the generator.

    Refer to: Generator .

scientia non olet · About LEMON Manuals