LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Mass Air Flow Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that the Mass Air Flow (MAF) sensor is clean and free of foreign material.
  1. Install the MAF sensor.

    Install the screws.

    Torque Specification: 1.9 Nm 

  2. Connect the MAF sensor electrical connector.
scientia non olet · About LEMON Manuals