LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Manifold Absolute Pressure Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Manifold Absolute Pressure (MAP) sensor.
  2. Connect the electrical connector.
  3. Secure the pipes.
  4. Install the Noise, Vibration and Harshness (NVH) pad.
  5. Install the engine cover.

    Refer to: Engine Cover - Ingenium I4 2.0L Petrol .

scientia non olet · About LEMON Manuals