LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Intake Camshaft Position Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Remove the engine acoustic cover.

    Refer to: Engine Cover - Ingenium I4 2.0L Petrol .

  2. G11308582

    Disconnect the breather pipe.

  3. G11308586

    Disconnect the electrical connector.

  4. G11308587

    Remove the intake camshaft position sensor.

scientia non olet · About LEMON Manuals