LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Cylinder Head Temperature Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: A new cylinder head temperature sensor must be installed.
    • Install the cylinder head temperature sensor.
    • Renew Part: Cylinder head temperature sensor Quantity: 1. 
    • Torque Specification: 11 Nm 
    • Install the retaining clip to the back of the electrical connector.
    • Connect the electrical connector.
  2. Install the intake air resonator.

    Refer to: Intake Air Resonator .

scientia non olet · About LEMON Manuals