LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Crankshaft Position Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the component is clean and free of foreign material.
    • Install the crankshaft position sensor.
    • Install the CKP retaining bolt.
    • Torque Specification: 12 Nm 
    • Connect the Crankshaft Position (CKP) sensor electrical connector.
  2. Install the engine undershield.

    Refer to: Air Deflector .

scientia non olet · About LEMON Manuals