LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Fuel Charging & Controls - Turbocharger - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol >> Turbocharger Oil Supply Tube >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specifications, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post ramp. Refer to: Lifting .
  2. Remove the accessory drive belt.

    Refer to: Accessory Drive Belt .

  3. WARNING: Be prepared to collect escaping oil.
    G11307874
    • Release the turbocharger oil feed pipe.
    • Remove and discard the banjo bolt and washers.
  4. WARNING: Be prepared to collect escaping oil.
    G11307900
    • Remove the turbocharger oil feed pipe.
    • Remove and discard the banjo bolt and washers.
scientia non olet · About LEMON Manuals