LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transmission Fluid Cooler - INGENIUM I4 2.0L Petrol (G1904868) >> Installation

Transmission Fluid Cooler - INGENIUM I4 2.0L Petrol (G1904868): Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the transmission fluid cooler assembly.
    • Install the bolt and tighten, to secure the transmission cooler assembly to the bracket.

    Torque Specification: 5 Nm 

  2. Install the 2 transmission cooler tubes to the transmission cooler assembly.
  3. Install the 2 coolant pipes to the transmission cooler assembly.
    • Install the front left lower fender splash shield.
    • Install the 3 clips securing the lower fender splash shield to the vehicle body.
  5. Fill the coolant system.

    Refer to: Cooling System Partial Draining and Vacuum Filling .

  6. Fill the transmission fluid system.

    Refer to: Transmission Fluid Drain and Refill .

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals