LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine System - General Information -- XE (X760)) >> Engine System - General Information >> Piston Pin To Bore Diameter >> General Procedures

General Procedures

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the diameter of the piston pin bore.
    NOTE: The piston and piston pin form a matched pair. Do not mix up the components.
    G11284738
    • Measure the diameter in two directions.
    • If the values are not to specification, install both a new piston and a new piston pin.
scientia non olet · About LEMON Manuals