LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine System - General Information -- XE (X760)) >> Engine System - General Information >> Cylinder Head Distortion >> General Procedures >> Check

General Procedures: Check

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable metallic straight edge and feeler gauge, measure the cylinder head face in the areas illustrated. Note the maximum value  .
    G11284748
  2. If the cylinder head exceeds the maximum value (0.2mm), the cylinder head must be machined.
    CAUTION: Machine the minimum  thickness of material from the cylinder head to meet specification. If a selection of cylinder head gaskets are available, increase the thickness of the cylinder head gasket by one size.
    NOTE:
    • Prior to having the cylinder head machined, prior approval is required by Jaguar or Land Rover engineering.
    • If the cylinder head requires machining, this must be carried out by a local engineering company.
scientia non olet · About LEMON Manuals