LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fuel Charging & Controls - Turbocharger - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol >> Turbocharger Oil Supply Tube >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the turbocharger oil supply tube.
    • Install new banjo bolt washers.

      Renew Part: Turbocharger oil feed pipe banjo bolt washers. Quantity: 4 

    • Install new banjo bolts.

      Renew Part: Turbocharger oil feed pipe banjo bolt. Quantity: 2 

      Torque: 18 Nm 

  2. Install the accessory drive belt.
    • CAUTION: Make sure that the accessory drive belt is correctly located on each pulley.
    • Release the accessory drive belt tensioner.
    • Install the breather pipe.
    • Install new O-ring seals.

      Renew Part: Breather hose O-ring seal Quantity: 2

      Torque: 12 Nm 

  4. Install the intake air resonator.

    Refer to: Intake Air Resonator .

  5. Check and top up the engine oil level.

    Refer to: Specifications .

scientia non olet · About LEMON Manuals