LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Emission Control - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine Emission Control - INGENIUM I4 2.0L Diesel >> Valve Cover Vent Oil Separator >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Remove the engine cover.
    G11306773
  2. Remove the Noise, Vibration and Harshness (NVH) pad.
    G11308100
  3. Release the breather pipe from the valve cover vent oil separator.
    G11308101
  4. Release the fuel injector wiring harness from the 3 retaining clips.
    G11308102
  5. Remove the valve cover vent oil separator.
    G11308103
scientia non olet · About LEMON Manuals