Engine Emission Control - INGENIUM I4 2.0L Diesel: Specifications
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Crankcase vent oil separator | 9 | 7 |
| Crankcase vent oil separator, wiring harness bracket. | 8 | 6 |
| Exhaust gas recirculation (EGR) cooler bolts | 12 | 8.8 |
| EGR cooler cross over pipe securing bolt | 12 | 7 |
| EGR valve inlet tube bolts | 10 | 7 |
| EGR valve outlet tube | 12 | 7 |
| EGR valve outlet tube support bracket | 12 | 6 |
| EGR valve nuts | 12 | 6 |
| EGR valve screws | 12 | 6 |
| EGR valve low pressure housing | 25 | 18.4 |
| EGR valve high pressure housing upper bolt | 12 | 6 |
| EGR valve high pressure housing lower bolt | 7 | 5 |
| Exhaust gas temperature sensor | 3.6 | 2.6 |
| Exhaust gas temperature sensor wiring harness bracket | 8 | 6 |
| Intake manifold adaptor | 8 | 4 |
| Intake manifold adaptor, wiring harness bracket | 8 | 6 |
| Camshaft position sensor | 8 | 4 |
| Valve cover vent separator | 12 | 7 |
| Diesel exhaust fuel injector clamp | 4.5 | 3.3 |
| Diesel exhaust fluid tank retaining bolts | 7 | 5.1 |
| Diesel exhaust fluid tank cover bolts | 10 | 7 |
| Diesel exhaust fluid injector | 10 | 7 |
| Diesel exhaust fluid assembly bolts | 7 | 5 |
| Diesel exhaust fluid shield bolts | 6 | 4.5 |