LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Emission Control - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine Emission Control - INGENIUM I4 2.0L Diesel >> Low Pressure Exhaust Gas RECIRCULATION Valve >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Remove the intake air resonator.

    Refer to: Intake Air Resonator .

  2. Disconnect the electrical connectors.
    G11308126
  3. G11308127
    • Remove the breather pipe.
    • Remove and discard the O-ring seal.
  4. Release the pressure sensor assembly.
    G11308128
  5. G11308129
    • Remove the low pressure EGR valve.
    • Remove and discard the O-ring seal.
  6. Remove and discard the gasket.
    G11308130
scientia non olet · About LEMON Manuals