LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Vehicle Dynamic Suspension -- XE (X760)) >> Vehicle Dynamic Suspension >> Air Line Connector >> General Procedures >> Activation

General Procedures: Activation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Make sure that the component is clean and free from foreign material and lubricant.
  • Make sure the correct size and type of air line connector is installed.
  • Do not reuse the air line connector. Always install a new air line connector every time it is released.
  1. Use a suitable tool to snap the air line connector collet off the air line.
    CAUTION: Using a suitable tool, remove the collet as illustrated. Attempting to slide the collet from the air line will result in damage.
    Make sure not to damage the airline.
    G11283984
  2. Remove the air line connector from the air line.
    G11283985
  3. Install and fully tighten the new air line connector to the correct component's torque. 
    G11283986

    Refer to: Specifications .

  4. Remove the air line connector cap from the air line connector.
    G11283987
  5. Fully insert the air line into the air line connector.
    CAUTION: Make sure that the component is clean and free from foreign material.
    G11283988
scientia non olet · About LEMON Manuals