Front Suspension: Specifications

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATION

DESCRIPTION

STAGE 1 (NM/LB-FT)

STAGE 2

STAGE 3

STAGE 4

Upper arm to body retaining nuts ⁽¹⁾

60 Nm/44 lb-ft

Upper arm ball joint to knuckle retaining nut and bolt ⁽³⁾

60 Nm/44 lb-ft

Knuckle to rear lower arm ball joint retaining nut ⁽²⁾

185 Nm/136 lb-ft

Rear lower arm to subframe retaining nut and bolt ⁽³⁾

100 Nm/74 lb-ft

180 degrees

Front lower arm to subframe retaining nut and bolt ⁽³⁾

100 Nm/74 lb-ft

180 degrees

Front lower arm to rear lower arm retaining nut and bolt ⁽³⁾

60 Nm/44 lb-ft

135 degrees

Stabilizer bar to subframe retaining bolts

60 Nm/44 lb-ft

Stabilizer bar link upper fixing RWD ⁽¹⁾

48 Nm/35 lb-ft

Stabilizer bar link lower fixing RWD ⁽¹⁾

48 Nm/35 lb-ft

Stabilizer bar link upper fixing AWD ⁽¹⁾

60 Nm/44 lb-ft

Stabilizer bar link lower fixing AWD ⁽¹⁾

60 Nm/44 lb-ft

Shock absorber mounting to body retaining nuts ⁽¹⁾

27.5 Nm/21 lb-ft

Shock absorber to mounting retaining nut ⁽¹⁾

30 Nm/22 lb-ft

Shock absorber to rear lower arm retaining bolt RWD

170 Nm/125 lb-ft

Shock absorber to yoke retaining nut and bolt AWD ⁽¹⁾

73 Nm/54 lb-ft

Yoke to rear lower arm bolt AWD ⁽²⁾

70 Nm/52 lb-ft

60 degrees

Wheel bearing to knuckle bolts RWD and AWD ⁽²⁾

170 Nm/125 lb-ft

Loosen 90 degrees

90 Nm/66 lb-ft

120 degrees

⁽¹⁾	Discard the nut.

⁽²⁾	Discard the bolt.

⁽³⁾	Discard the nut and bolt.