Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Make sure that the mating faces are clean and free of corrosion and foreign material.
CAUTION: Make sure that new bolts are installed.

Install the Torx bolts and tighten in the sequence shown.

Fig 1: Front Wheel Bearing And Wheel Hub Bolts Tightening Sequence
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Wheel bearing bolts Quantity: 1.

Torque Specifications:

Stage 1: 170 Nm

Stage 2: Loosen 90°

Stage 3: 90 Nm

Stage 4: 120°
Torque Specification: 9 Nm
Refer to: Brake Disc - V6 S/C 3.0L Petrol/INGENIUM I4 2.0L Diesel (Installation).