Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Remove the front subframe.
Refer to: Front Subframe - INGENIUM I4 2.0L Petrol
-
NOTE: The stabilizer bar bushes are bonded in place and do not separate from the bar.
Remove the front stabilizer bar.