LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Front Suspension -- XE (X760)) >> Front Suspension >> Front Lower Arm >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Nuts and bolts must be tightened with vehicle at normal ride height.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  2. Refer to: Wheel and Tire
  3. CAUTION: Discard the nut and bolt.
    G11305466

    Renew Part: Lower control arm nut and bolt, Quantity: 1.

    Torque Specifications: 

    Stage 1: 60 Nm 

    Stage 2: 135° 

  4. CAUTION: Discard the nut and bolt.
    G11305467

    Renew Part: Lower control arm nut and bolt, Quantity: 1.

    Torque Specifications: 

    Stage 1: 140 Nm 

    Stage 2: 240° 

  5. G11305468

    Torque Specification: 9 Nm 

scientia non olet · About LEMON Manuals