Lower lateral control arm
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The forged aluminum lower lateral control arm is fitted with a bush in its inner-end which locates between brackets on the subframe.
The outer-end of the lateral control arm has an integral ball joint which locates to the wheel knuckle. An integral clevis bracket on the forward face of the lateral control arm allows for the attachment of the lower forward control arm. A bush is fitted below the clevis bracket to provide for the attachment of the stabilizer bar link. A bush fitted to a cross hole in the lateral control arm, provides the location for the forked attachment of the spring and shock absorber assembly.