LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine - INGENIUM I4 2.0L Diesel >> Upper Timing Cover >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a 3 mm diameter bead of RTV sealant (Loctite 5970) to the Upper timing chain cover gasket in the position shown.
    NOTE: Make sure a new gasket is installed.
    G11309018

    Renew Part:  Timing chain cover gasket Quantity: 1

  2. NOTE: Take care when installing the Upper timing chain cover gasket.
    G11309019
  3. CAUTION: Install the component in the sequence shown.
    G11309020

    Torque Specification:

    1. Stage 1: 5 Nm 
    2. Stage 2: 13 Nm 
    3. Stage 3: Loosen: 180° 
    4. Stage 4: 13 Nm 
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals