LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine - INGENIUM I4 2.0L Diesel >> Hydraulic Valve Tappet >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. ?When ?disconnected all openings must be sealed.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Camshaft Carrier .
  2. CAUTION: Remove and store roller finger cam followers and hydraulic valve tappets in the fitted order and invert to prevent oil loss. Do not squeeze hydraulic valve tappet chambers together.
    G11309265
  3. CAUTION:
    • Check roller finger cam followers and hydraulic valve tappets for signs of wear, scoring and overheating.
    • Make sure oil holes in the hydraulic valve tappets are clear.
    • Care must be taken not to damage the retention clip.
    G11309266
scientia non olet · About LEMON Manuals