LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine - INGENIUM I4 2.0L Diesel >> Hydraulic Valve Tappet >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Lubricate hydraulic valve tappets, roller finger cam followers and hydraulic valve tappet bores with engine oil.
    • Install hydraulic valve tappets and roller finger cam followers to the original fitted order.
    • Make sure the retention clip on the roller finger cam follower has engaged and installed correctly to the hydraulic valve tappet.
    • Make sure roller finger cam follower is located correctly on the valve tip between the two guidance arms.
    G11309078
  2. Refer to: Camshaft Carrier .
scientia non olet · About LEMON Manuals