LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine - INGENIUM I4 2.0L Diesel >> Exhaust Valve Stem Seals >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install new valve stem seals.
    • Renew Part: Valve stem oil seals. 
  2. Install the valve, spring and cap.
    NOTE: Install the components to their original fitted positions.
    G11309148
  3. G11309149
    • Using the special tool, compress the valve spring and install the collets.
    • Repeat the process for the remaining 7 intake valves.
  4. Install the cylinder head.

    Refer to: Cylinder Head .

scientia non olet · About LEMON Manuals