LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine - INGENIUM I4 2.0L Diesel >> Crankshaft Front Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool install a new front crankshaft seal.
    G11308995

    Special Tool(s):  JLR-303-1628

    Renew Part: Crankshaft front oil seal. 

    Torque Specification: 26 Nm 

  2. Install the crankshaft pulley.

    Refer to: Crankshaft Pulley .

  3. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals