Portable Audio Interface Panel/USB Power Supply

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

If DTC B1252-19 (USB Port General Electrical Failures - Circuit current above threshold) has been logged, the IAM has detected a current draw from the Portable Audio Interface Panel in excess of 1.7 Amps. In these circumstances, the power supply to the Portable Audio Interface Panel will be cut for an ignition cycle. To reset the system and restore power, the vehicle needs to be locked (with ignition off) and armed for at least 5 minutes.

The USB port on the Portable Audio Interface Panel is able to supply current to a maximum of 500mA. It should be noted that any portable devices connected via the USB port that required more power may not charge or power up correctly and that this may affect the operation of this device with the infotainment system.