BLUETOOTH® Pairing

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The mobile phones must be paired with the infotainment system. Mobile phones supporting simple secure pairing will automatically generate a six digit personal identification number on the system and on the mobile phone. Once the request is accepted, the mobile phone will be paired to the system.

The pairing procedure using the mobile telephone or media device is as follows:

Switch the ignition on and make sure that the Touch Screen (TS) is active.
Make the infotainment system discoverable:
- On vehicles with InControl Touch audio system, use the 'Phone' softkey on the home screen.
- On vehicles with InControl Touch Pro audio system, use the 'Tap to connect phone' softkey on the home screen.
Switch on the mobile phone or media device's Bluetooth® and make sure that the mobile phone or media device is in discoverable mode. Refer to the mobile phone or media device operating instructions for information.
Use the mobile phone or media device to search for new Bluetooth® device, matching the name on the TS.
A passkey number will appear on the mobile phone or media device. If the number matches the number on the TS, select 'Yes' on the TS or press 'Pair' on the mobile phone or media device.
Once the mobile phone or media device is paired it will appear on the connected device list on the TS.

On vehicles with InControl Touch audio system, the user can connect a mobile phone or a media device using the Touch Screen (TS).

The pairing procedure using the TS is as follows:

Switch on the mobile phone or media device's Bluetooth® and make sure that the mobile phone or media device is in discoverable mode (refer to the mobile phone or media device operating instructions for information).
Select 'Search for Bluetooth Devices' from the list on the TS.
The vehicle infotainment system will search for a mobile phone or media device and if found, the mobile phone or media device identification name will be displayed. If the mobile phone or media device is not found, 'No Devices Have been Found' will be displayed on the TS.

For further information about Bluetooth® pairing, refer to the relevant section in the Owners Handbook.