Washer Fluid Level Sensor
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The washer fluid level sensor has a float with integral magnet which is connected to the BCM/GWM assembly via hard wired connection. The sensor has a contact, which is normally open when the windshield washer reservoir is full. When the washer fluid level reduces to approximately one liter, the magnetic float pivots down, and close the switch contacts. The BCM/GWM assembly then sends a message to the Instrument Cluster (IC) via the HS CAN comfort systems bus, the 'WASHER FLUID LOW' message is displayed in the message center.