LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Wipers & Washers -- XE (X760)) >> Wipers And Washers >> Description And Operation >> Description >> Windshield Wiper Limp Home Mode

Windshield Wiper Limp Home Mode

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

If a LIN bus failure occurs between the BCM/GWM assembly and the wipers and washers control switch during the operation of the windshield wiper, the BCM/GWM assembly will initiate limp home mode. The BCM/GWM assembly will operate the windshield wipers continuously at slow speed while an active wiper mode is selected.

scientia non olet · About LEMON Manuals