Clutch Pedal Position Sensor (Manual Transmission Vehicles Only)

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

The clutch pedal position sensor gives the ABS control module a continuous measure of the clutch pedal's position.

The clutch pedal position sensor is attached to the clutch master cylinder. The sensor is a Permanent Magnet Linear Contactless Displacement type of sensor.

The signal from the clutch pedal position sensor is transmitted on a hardwired connection to the Powertrain Control Module (PCM). The PCM transmits the signal to the ABS control module on the High Speed (HS) Controller Area Network (CAN) Powertrain systems Bus.

To check the plausibility of the input from the sensor, the ABS control module uses the inputs from the bottom of travel switch in the clutch system.