Secondary Bulkhead Left Panel - INGENIUM I4 2.0L Diesel (G1817278): Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Remove the RH secondary bulkhead panel.
Refer to: SECONDARY BULKHEAD RIGHT PANEL - INGENIUM I4 2.0L DIESEL
Torque : 55 Nm
Torque : 8 Nm
- Remove the fuel filter.
Refer to: FUEL FILTER
Torque : 10 Nm