LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Supercharger Cooling - V6 S/C 3.0L Petrol -- F-Pace (X761)) >> Supercharger Cooling - V6 S/C 3.0L Petrol (G1829883) >> Removal And Installation >> Coolant Pump (G1829880) >> Installation

Coolant Pump (G1829880): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the coolant pump.

    Torque: 9 Nm 

  2. Connect the 2 coolant hoses.
    • Connect the coolant pump electrical connector.
    • Install the 2 wiring harness clips.
  4. Install the left air cleaner outlet pipe.

    Refer to: LEFT AIR CLEANER OUTLET PIPE .

  5. Install the left air cleaner.

    Refer to: LEFT AIR CLEANER .

  6. Fill the cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING .

  7. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals