LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> F-Pace Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V6 S/C 3.0L Petrol -- F-Pace (X761) >> Engine Cooling - V6 S/C 3.0L Petrol (G1824624) >> Removal And Installation >> Cylinder Head Coolant Outlet Pipe (G2732374) >> Removal

Cylinder Head Coolant Outlet Pipe (G2732374): Removal

WARNING: Be prepared to collect escaping coolant.
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING .

  2. Remove the supercharger.

    Refer to: SUPERCHARGER .

  3. G13887632Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Discard the upper pipe.

  4. G13887633Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the 2 bolts.
    • Remove and discard the lower pipe.