Rear Stabilizer Bar (G2187515): Removal

NOTE:

This procedure contains illustrations showing certain components removed to provide extra clarity.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
Remove the rear wheel and tire assembly.
Refer to: WHEEL AND TIRE .
Remove the rear silencer.
Refer to: REAR SILENCER - EXHAUST SYSTEM - INGENIUM I4 2.0L DIESEL.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove and discard the 2 nuts.
- Release the 2 rear stabilizer bar link.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove and discard the 4 bolts.
- Remove the rear stabilizer bar.