LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> E-Pace Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- E-Pace/X540 >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2110286) >> Removal And Installation >> Auxiliary Radiator (G2473136) >> Removal

Auxiliary Radiator (G2473136): Removal

CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  1. Raise and support the vehicle on a suitable 2-post lift.

    Refer to: LIFTING .

  2. Remove the front bumper.

    Refer to: FRONT BUMPER .

  3. Partially drain the engine cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .

  4. CAUTION: Be prepared to collect escaping coolant.
    G13895233Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Disconnect the 2 engine coolant hoses.
    • Remove the 2 bolts.
    • Remove the nut.
    • Remove the auxiliary radiator assembly.
  5. G13895234Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the 2 bolts.
    • Remove the auxiliary radiator.